Preparing The Load - Miele A 306/1 Operating Instructions Manual

Preparing the load

 Damage to the measuring cylinders.
If the measuring cylinders touch each other during reprocessing or
rest against the wash cabinet walls, damage can occur at the
points of contact. For example, the items may become scratched
or the glass may break.
Arrange the measuring cylinders so that they are not touching each
other or resting against the wash cabinet walls.
To prevent damage, adjust the position of the measuring cylinders
as required by moving the holder frames or the plastic supports on
the nozzles or change the load arrangement of the module.
Plastic supporting feet can be removed as required and repro-
cessed separately.
Long measuring cylinders or measuring cylinders with extra-wide
supporting feet must not be reprocessed in the cleaning machine.
Guide the measuring cylinders through the holder frames and posi-

tion the cylinders on the injector nozzles.
Depending on the construction type of the measuring cylinder, the
following points must be observed.
en - Areas of application
33