To Clean The Suction Grille; To Clean The Air Outlet And Outside Panels - Daikin FXFN50A2VEB Installation And Operation Manual

Design panel:
1
3 Clean the air filter. Use a vacuum cleaner or wash with water. If
the air filter is very dirty, use a soft brush and neutral detergent.
4 Dry the air filter in the shadow.
5 Reattach the air filter and close the suction grille.
6 Turn ON the power.
7 To remove warning screens, see the reference guide of the
user interface.
7.2.2

To clean the suction grille

NOTICE
Do NOT use water of 50°C or higher. Possible
consequence: Discoloration and deformation.
1 Open the suction grille.
Standard panel:
Design panel:
2 Remove the suction grille.
Standard panel:
1
FXFN50~112A2VEB
CO₂ Conveni-Pack: indoor unit
3P672850-1A – 2021.07
3
3 Remove the air filter.
4 Clean the suction grille. Wash with a soft bristle brush, and
water or neutral detergent. If the suction grille is very dirty, use
a typical kitchen cleaner, leave it on for 10 min, then wash it
with water.
5 Reattach the air filter (step 3 in reverse order).
6 Reattach the suction grille and close it (step 2 and 1 in reverse
order).
7.2.3
WARNING
Do
consequence: Electrical shock or fire.
NOTICE
▪ Do NOT use gasoline, benzene, thinner polishing
▪ Do NOT use water or air of 50°C or higher. Possible
▪ Do NOT scrub firmly when washing the blade with
Clean with a soft cloth. If it is difficult to remove stains, use water or
neutral detergent.
2
45°
7 Maintenance and service
Design panel:
2
1

To clean the air outlet and outside panels

NOT let the indoor unit
powder or liquid insecticide. Possible consequence:
Discoloration and deformation.
consequence: Discoloration and deformation.
water. Possible consequence: The surface sealing
peels off.
Installation and operation manual
3
get wet. Possible
11