Chapter 5: Nvr Installation; Connecting Your Wireless Nvr - Night Owl WNVRC20 Series User Manual

Chapter 5: NVR Installation

5.1 Connecting Your Wireless NVR

Connect the two included antennas to your wireless NVR. This will ensure you achieve the maximum
1
wireless range for transmission from your wireless cameras.
Plug one end of the included HDMI cable into the HDMI port on the back of the Wireless NVR.
2
Plug the other end of the HDMI cable into the back of your TV or monitor.
3
You may also connect using VGA
If your TV does not have an HDMI port, you will need to purchase a VGA video cable. For
VGA connection, attach one end of the VGA cable to the NVR VGA port and the other end
to your TV VGA port.
HDMI
HDMI
(not included)
21