Night Owl WNVRC20 Series User Manual page 17

Next, you will need to reset the replacement
4
camera. To do so, press and hold the reset
button until you hear a beep, indicating the
camera has begun the reset process.
NOTE: The reset process may take up to 3 minutes.
5
After 3 minutes have passed or after
A
hearing the camera beep, click on Wireless
Add located on the Add Camera screen.
Your NVR will now search for new cameras.
B
NOTE: The replacement camera will not appear
in the bottom screen with all other paired
cameras until the NVR finishes the process of
finding and pairing the new camera.
Within the Wireless Add screen, the
6
"Number of Cameras Connected" signifies
those cameras that are already paired to
the Wireless NVR and will not immediately
reflect this new camera.
NOTE: You cannot exceed the number of Wireless NVR channels you have. If you have a 4 channel system, the
maximum number of cameras you can have paired is 4.
NOTE: The location of the camera reset button may vary.
B
17
A