Wi-Fi Nvr Diagram - Night Owl BWNIP2 Series User Manual

Wi-Fi NVR Diagram

Images used are for reference only. Your product may vary slightly depending on your model number.
HDMI Port – Connects the Wi-Fi NVR to a TV or Monitor using an HDMI cable.
1
RJ-45 (Ethernet) Port – Used to connect the Wi-Fi NVR to your modem/router for remote viewing.
2
Please note that your Wi-Fi NVR comes with built-in Wi-Fi for the cameras to transmit to the Wi-Fi
NVR. However, you will need to manually connect the Wi-Fi NVR to your modem/router to remotely
view on a smart device or PC/Mac®.
USB Ports – Allow for the connection of a USB mouse and/or a USB flash drive. You will connect the
3
included USB mouse to assist you in navigating the Wi-Fi NVR's menu interface. You will connect a
USB flash drive to download video files from the Wi-Fi NVR for long term storage or sharing.
Power Input – Used to connect the included 12V DC power supply.
4
Wi-Fi NVR Antenna Mounts – For installation of the two included Wi-Fi NVR antennas.
5
5
FRONT VIEW
REAR VIEW
1 2 3
7
5
4