Troubleshooting; Replacements Parts List - GHP Group TT1-15C User's Manual And Operating Instructions

PROBLEM
1. Unit will not light.
2. Burner will not stay lit when
gas valve plunger released.
3. Excessive flames coming out
of burner, not glowing red.
4. Piezo won't spark.
(Some models only)
5. Flames flashback/burn inside 1. Debris or spider webs in mixing tube.
the mixing tube
ITEM DESCRIPTION
1
2
3
4
5
6
7 Manifold
8
9
10
11
12 Handwheel
13 Electrode
14
15
PROPANE TANK TOP HEATER

TROUBLESHOOTING

POSSIBLE CAUSE
1. Valve on propane cylinder not open.
2. Propane cylinder empty
3. Regulator not in "High" position
4. Excess flow device triggered.
5. Defective Regulator.
1. Tilt switch open
2. Wiring of thermocouple
3. Defective thermocouple
4. Defective tilt switch
5. Defective gas valve
1. Debris or spider webs in mixing tube
or burner.
2. Clogged orifice
1. Defective piezo
2. Ignitor misaligned with Thermocouple shield 2. Realign ignitor with thermocouple shield.
3. Wire frayed or damaged.
2. Clogged orifice
REPLACEMENT PARTS LIST
TT15CPDG
GS13
KW-16B
1. Open cylinder valve by turning counterclockwise.
2. Have cylinder refilled.
3. Turn regulator to "High" position.
4. Close cylider valve, wait 5 minutes and reopen slowly.
5. Replace Regulator assembly.
1. Correct alignment of unit to ensure it is vertical.
2. Check wiring connections are properly engaged.
3. Replace thermocouple.
4. Replace tilt switch.
5. Replace gas valve assembly.
1. Clean burner tube with bottle brush, rinse in water
and drain thoroughly before reintsalling.
2. Remove and clean using compressed air.
1. Replace Piezo
3. Replace wire.
1. Clean burner tube with bottle brush, rinse in water
and drain thoroughly before reintsalling.
2. Remove and clean using compressed air.
TT15CL/TT15CDGP
TT1-15C, TT15000M
GS13 GS13
GDH1
KW-16B KW-16B
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
15
CORRECTIVE ACTION
TT30CL/TT30CDGP
TT30CPDG
TT2-30C, TT30000M
GS13
GDH1
KW-16B