Amcrest IP8M-2496EW-V2 User Manual page 9

5. Scan the QR code
the camera or manually enter the camera's serial
number into the Enter camera S/N (serial number)
field. Press Next to continue.
7. Set a new password for your camera. The password
must be between 8 to 32 characters long and contain
only letters and numbers. When you have finished
setting the password for your camera, enter the
password again in the Confirm Camera Password
section. Tap Next to continue.
For more information about the Amcrest Cloud app and its features, visit
Amcrest View Pro Setup
To add your PoE camera to the Amcrest View Pro app follow these steps:
•
Make sure your camera is plugged into a power source and your Ethernet cable is connected from the camera to
your router.
•
Make sure your camera and mobile device are on the same network during setup.
1. Download and open the Amcrest View Pro app from the App Store or Play Store.
on the back/side/bottom of
6. If you are adding a new camera that does not have
a set password the app will automatically detect that
a new camera is being added. Tap OK to proceed.
8. Confirm and adjust any needed settings for your
camera. When all settings have been confirmed, tap
Finish.
amcrest.com/support
9