Table of Contents
Advertisement
I/O ports include a VGA (monitor) port, two USB 3.0 ports (additional one internal
USB headers are included on the serverboard), an IPMI dedicated LAN port and
two Ethernet ports.
Note: For IPMI Configuration Instructions, please refer to the Embedded BMC
Configuration User's Guide available at http://www.supermicro.com/support/
manuals/.
Graphics Controller
The X10DRT-P/PT/PIBF features an integrated ASpeed 2400 BMC with an
integrated VGA/2D graphics controller.
InfiniBand
The 6028TP-HTFR server include a FDR (fourteen data rate) speed InfiniBand
QSFP connector. InfiniBand is a scalable serial communications link intended for
connecting processors with high-speed peripherals.
Other Features
Other onboard features that promote system health include onboard voltage
monitors, a chassis intrusion header, auto-switching voltage regulators, chassis and
CPU overheat sensors, virus protection, node manager software and BIOS rescue.
1-3
Server Chassis Features
The following is a general outline of the main features of the SC827HQ+ server
chassis.
System Power
Each SC827HQ+ chassis model includes a high-efficiency 80-plus Platinum certified
power supply, rated at 2000 Watts plus one redundant backup power supply.
In the unlikely event your power supply fails, replacement is simple and can be
accomplished without tools.
SATA Subsystem
The SC827HQ+ supports up to twelve (12) 3.5" hot-swap SATA drives in trays
(3 for each node). These drives are hot-swappable units and are connected to a
backplane that provides power and control.
1-3
Chapter 1: Introduction
Advertisement
Table of Contents
