Sanyo VCC-4374P Instruction Manual page 12

SETTINGS
White balance adjustment
Normally the WB (white balance) switch is set
to the A (automatic) position and the white
balance is adjusted automatically. If a manual
white balance adjustment is necessary, follow
the steps below.
Set the WB switch to the M (manual) position,
then adjust the colour.
•
Turn R (VR303) to set the red ratio and/or
B (VR302) to set the blue ratio.
Lens iris adjustment
If using a DC type auto-iris lens, you will need
to set the LEVEL (VR301) volume when
shooting in the conditions described below.
L (counterclockwise): To decrease the contrast
H (clockwise): To increase the contrast
•
If shooting simultaneously in a dark room and through a bright
window.
• If the subject background is extremely bright or dark.
•
If the brightness of the picture on the monitor is not correct.
11
English
Use an auto-iris lens and set the EI/BLC switch
to the BLC-ON position, to engage the
WB
backlight compensation function.
A
If using a VIDEO type auto-iris lens
•
M
•
R B
VR303 VR302
CAUTION:
VR301
The electronic iris function and the backlight compensation function
LEVEL
cannot operate simultaneously.
L H
Backlight compensation setting
The ALC volume on the lens should be
turned all the way to Av (Average).
If the backlight compensation function does
not compensate properly for the conditions, set using the LEVEL
volume on the lens.
EI
ON
OFF
ON
BLC