Important Assembly Instruction - Impex Circuit Fitness AMZ-587R Owner's Manual

ASSEMBLY INSTRUCTION
• Tools Required for Assembling the Machine: One Crossing Wrench and Allen
Wrench, provided by manufacturer.
• NOTE: It is strongly recommended that two or more people assemble this machine to
avoid possible injury.
STEP 1
1. Attach the Front Stabilizer (#3) with Carriage Bolts (#4), Flat Washers (#5) and Hex Nuts (#6)
to the Main Frame (#1).
2. Thread the Stopper (#24) into the Sliding Frame from the bottom.
© IMPEX INC.
5
24
6
6
5
4
6
2X
3
www.marcypro.com
2X
2X