Supermicro SERIES3800/S120T User Manual page 72

SERIES3800/S120T
User's Manual
(7045A-C3/7045A-CT)
IDE Primary Master/Slave, IDE Secondary Master/Slave,
SATA Port3, SATA Port4 and Ext. Primary Master/Slave
These settings allow the user to set the parameters of IDE Primary Master/Slave,
IDE Secondary Master/Slave, SATA Port 3, SATA Port 4 and Ext. Primary Master/
Slave. Hit <Enter> to activate the following sub-menu screen for detailed options
of these items. Set the correct confi gurations accordingly. The items included in
the sub-menu are:
Type
This option allows the user to select the type of IDE hard drive. The option Auto
will allow the BIOS to automatically confi gure the parameters of the HDD installed
at the connection. Enter a number between 1 to 39 to select a predetermined HDD
type. Select User to allow the user to enter the parameters of the HDD installed.
Select CDROM if a CDROM drive is installed. Select ATAPI if a removable disk
drive is installed.
7-4