Table of Contents
Advertisement
Chassis Intrusion
The Chassis Intrusion header is des-
ignated JL1. Attach an appropriate
cable from the chassis to inform you
of a chassis intrusion when the chas-
sis is opened
Wake-On-LAN
The Wake-On-LAN header is des-
ignated JWOL1 on the serverboard.
See the table on the right for pin
defi nitions. You must also have a LAN
card with a Wake-On-LAN connector
and cable to use this feature.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR1. This function allows
your computer to receive and be
"awakened" by an incoming call when
in the suspend state. See the table on
the right for pin defi nitions. You must
also have a WOR card and cable to
use this feature.
LAN1/2 (Ethernet Ports)
Two Ethernet ports (designated LAN1
and LAN2) are located beside the VGA
port on the I/O backplane. These ports
accept RJ45 type cables.
Serial Ports
Two serial ports (COM1 and COM2)
are included on the I/O backplane.
See the table on the right for pin
defi nitions.
Chapter 5: Advanced Serverboard Setup
Chassis Intrusion
Pin Defi nitions (JL1)
Pin#
Defi nition
1
Intrusion Input
2
Ground
Wake-On-LAN
Pin Defi nitions
(JWOL1)
Pin#
Defi nition
1
+5V Standby
2
Ground
3
Wake-up
Wake-On-Ring
Pin Defi nitions
(JWOR1)
Pin#
Defi nition
1
Ground (Black)
2
Wake-up
Serial Port Pin Defi nitions
(COM1/COM2)
Pin #
Defi nition
1
DCD
2
RXD
3
TXD
4
DTR
5
Ground
5-17
Pin #
Defi nition
6
DSR
7
RTS
8
CTS
9
RI
10
NC
Advertisement
Table of Contents
