Huawei NetEngine-8000-M8 Manual page 10

c
Installing a Chassis in an ETSI Cabinet with Middle Columns
5
Install the 19-inch mounting ears and conversion
5
mounting ears on both the left and right sides of
the chassis.
7
7 Install the chassis in the cabinet.
Connect the PGND cable to the
6
ground point on a column of the
cabinet or to an indoor ground bar.
M4
12±1.2 Kgf· cm
Attach a PGND cable to the chassis. The PGND
6
cable can be installed on the front or side of the
chassis. The side of the chassis is recommended.
M6
30±3 Kgf· cm
10
M6
30±3 Kgf· cm