Huawei NetEngine-8000-M8 Manual page 6

4
Installing a Chassis in Cabinet
a
Installing a Chassis in a Standard 19-Inch Cabinet
1
Floating nut
Mounting hole
When tightening floating nuts, ensure a minimum
distance of 75 mm between a chassis side and its
adjacent column for ventilation.
Fix floating nuts and M6 screws in the correct holes.
1
3
Connect the PGND cable
to the ground point on a
column of the cabinet or
to an indoor ground bar.
Attach a PGND cable to the chassis. The PGND cable
3
can be installed on the front or side of the chassis.
2
Install the cable management frame and power
2
cable binding bracket in the chassis.
4
M6
30±3 Kgf· cm
4 Install the chassis in the cabinet.
6
M3
5.5±0.5 Kgf· cm
M6
30±3 Kgf· cm