Advertisement
Lossnay Energy Recovery Ventilator
MODELS:
LGH-15RVX-ER,
LGH-50RVX-ER,
LGH-100RVX-ER, LGH-150RVX-ER, LGH-200RVX-ER
Installation Instructions
Models LGH-15 to 100RVX-ER Models LGH-150 and 200RVX-ER
This product needs to be installed properly in order to ensure maximum functionality as well as safety.
Please make sure to read this installation manual before starting the installation.
Installation must be performed by a dealer or installation contractor. Please note that improper installation may cause malfunction or accident.
"Operating Instructions" and this manual must be handed over to the customer after completing the installation.
Safety precautions
The following signs indicate that death or serious injury may be caused by failure to heed the precautions described below.
WARNING
Do not modify or disassemble.
Do not
disassemble
The Lossnay unit and remote controller should not be
installed where it is highly humid, like a bathroom, or
other wet place.
Prohibition of use in
bath or shower room
Connect the product properly to ground.
Connect the
grounding wire.
main unit securely.
The instructions
given must be
followed.
LGH-25RVX-ER,
LGH-65RVX-ER,
LGH-35RVX-ER
LGH-80RVX-ER
(For use by dealer/contractor)
Contents
Safety precautions ...............................................1
Outline drawings ..................................................3
Standard installation examples............................4
Installation method ..............................................4
Function settings ...............................................13
Check points after installation work ...................21
Trial operation ....................................................21
professionals, and be implemented safely and securely
in accordance with the engineering standards and the
extension wiring rules for electrical equipment.
(Poor connection or improper wiring work could cause
Install a power supply isolator at the power supply
side as per local electrical regulations. All supply
circuits must be disconnected before obtaining
cable size and connect the cables securely to prevent
disconnection when they are pulled.
The instructions
given must be
followed.
Select an adequate place for the opening to introduce
outdoor air, where it will not intake the exhaust fumes
like combustion gas, or others, and there is no risk of
blockage.
(Shortage of fresh air could put the room in a state of
A duct made of steel must be installed with care not
to be connected electrically with metal, wire, stainless
steel plate, or others.
Eng-1
Hide quick links:
Advertisement
