AGCO FENDT 5250L Workshop Manual

Hide thumbs

page of 41

/ 41
Bookmarks

Quick Links

Download this manual

FENDT

5250L

5250L AL

6250L

6270L

WORKSHOP

MANUAL

IMPORTANT

AGCO Policy is one of continuous

improvement and the right to

make modifications and changes

on combine configuration.

So if some of the information

included on this Manual are

different from that one on your

combine, please consult your

AGCO dealer

Need help?

Do you have a question about the FENDT 5250L and is the answer not in the manual?

Questions and answers

Summary of Contents for AGCO FENDT 5250L

Page 1 FENDT 5250L 5250L AL 6250L 6270L IMPORTANT AGCO Policy is one of continuous improvement and the right to make modifications and changes on combine configuration. So if some of the information included on this Manual are WORKSHOP different from that one on your...
Page 2 In case of disagreement, refer to AGCO Sales and Service networks. IMPORTANT CAUTION ◊ All repair and maintenance works listed in this manual must be carried out only by staff belonging to the AGCO Service Network, strictly complying with the instructions given and using, whenever required, the special tools.
Page 3 CONTENT Sections - - GENERAL INFORMATION ........- - ENGINE .
Page 4 MODEL IDENTIFICATION 5 BS 5250 L 5 BS AL 5250 L AL 6 AS 6250 L 6 BS 6270 L DESCRIPTION OF THE COMBINE IDENTIFICATION NUMBER : 2581 : 2581 10001 Example: a Technical type d Identification number: 258110001. It is formed by two parts: D First part (b), formed by 4 numbers ”2581”: it corresponds to the technical type (machine model).
Page 5 IMPORTANT THE COMBINE ASSEMBLY, AT THE ARRIVAL TO THE DEALER OR IMPORTER, HAS TO BE MADE FOL- LOWING THE “ASSEMBLY INSTRUCTION BOOK”. BEFORE THE DELIVERY OF COMBINE TO THE CUSTOMER, THE PRE- -DELIVERY INSPECTION HAS TO BE MADE FOLLOWING THE P.D.I. MODULE INSTRUCTIONS AS THE ONE REPORTED BELOW. Find manuals at http://best-manuals.com/search?&s=FENDT-LA327258010F.PDF...
Page 6 Find manuals at http://best-manuals.com/search?&s=FENDT-LA327258010F.PDF...
Page 7 Find manuals at http://best-manuals.com/search?&s=FENDT-LA327258010F.PDF...
Page 8 Find manuals at http://best-manuals.com/search?&s=FENDT-LA327258010F.PDF...
Page 9 Find manuals at http://best-manuals.com/search?&s=FENDT-LA327258010F.PDF...
Page 10 Find manuals at http://best-manuals.com/search?&s=FENDT-LA327258010F.PDF...
Page 17 SECTION 00 - - GENERAL INFORMATION Section 00 - - GENERAL INFORMATION GENERAL INSTRUCTION IMPORTANT NOTE All maintenance and repair works described in this manual must be carried out only by the LAVERDA service net- work, strictly complying with the instructions given and using the required special tools. Anybody carrying out the above interventions without strictly complying with the prescriptions is fully responsible for the occurred damage.
Page 18 -- part number of the ordered part, which can be found in the ”Spare Part Catalogue”, used for order processing. REMARKS ABOUT TOOLS The tools that AGCO suggests and describes in this manual have been: -- expressly studied and designed to operate on AGCO range combines;...
Page 19 SECTION 00 - - GENERAL INFORMATION SAFETY REGULATIONS PAY ATTENTION TO THIS SYMBOL This warning symbol points out important messages involving your personal safety. Carefully read all the suggested safety precautions to avoid potential hazards and safeguard your health and personal safety. In this manual you will find this symbol together with the following key words: WARNING - - In case of warning aimed at preventing unsuitable repair works, involving potential hazards to the operator’s safety.
Page 20 SECTION 00 - - GENERAL INFORMATION Use only the prescribed points for towing the ma- In case of servicing operations to be made outside ◊ ◊ chine. Make the connection with the utmost care: the workshop, drive the combine to a flat area and make sure that the envisaged pins and/or catches lock it.
Page 21 SECTION 00 - - GENERAL INFORMATION START- -UP HYDRAULIC SYSTEMS ◊ Fluid coming out from a very small port can be al- ◊ Never run the engine in closed areas without suit- most invisible and be strong enough to penetrate able ventilation systems for exhaust gas ejection.
Page 22 SECTION 00 - - GENERAL INFORMATION COMBINE IDENTIFICATION The combine and its main parts are identified by serial numbers and/or production codes. The position of the different identification data is shown below. NOTE: always state the machine identification data to your Dealer while asking for spare parts or service in- terventions.
Page 23 SECTION 00 - - GENERAL INFORMATION Engine identification Fig. 3 The engine identification is made by the information plate (1), on the valve cover for IVECO engines, and the serial number plate (2) on the basement for SISU engines. The plate shows the following information: -- series range;...
Page 24 SECTION 00 - - GENERAL INFORMATION Cab identification - - Fig. 6 The plate is located in the left lower side of the oper- ator’s seat, under the concave opening control levers. Hydrostatic pump identification Fig. 7 The plate is located on the pump body front part Hydrostatic motor identification Fig.
Page 25 SECTION 00 - - GENERAL INFORMATION Chaff spreader identification (if fitted) Fig. 9 The identification plate is located on the right side, next to the lever to adjust the chaff spreader position. Rockinger tow hook identification (if fitted) Fig. 10 The plate is placed in the upper part of the Rockinger tow hook.
Page 26 SECTION 00 - - GENERAL INFORMATION CAPACITIES 5 BS - - 6AS - - 6BS QUANTITY dm (litrers) RECOMMENDED RECOMMENDED INTERNATIONAL INTERNATIONAL COMPONENTS TO BE FILLED COMPONENTS TO BE FILLED PRODUCTS SPECIFICATION 5BS - - 6AS ANTI FREEZE Cooling system (50% water recmd.) Cleaned and filtered Fuel tank...
Page 27 SECTION 00 - - GENERAL INFORMATION CAPACITIES 5BS AL QUANTITY dm (litrers) RECOMMENDED RECOMMENDED INTERNATIONAL INTERNATIONAL COMPONENTS TO BE FILLED COMPONENTS TO BE FILLED PRODUCTS SPECIFICATION 5BS - - 6AS ANTI FREEZE Cooling system (50% water recmd.) Cleaned and filtered Fuel tank diesel oil IVECO engine sump and filter...
Page 28 SECTION 00 - - GENERAL INFORMATION GENERAL FEATURES - - 5BS - - 6AS - - 6BS FEEDING DEVICE CUTTING HEADER ....... . . Grain header -- min.
Page 29 SECTION 00 - - GENERAL INFORMATION MULTI--CROP--SEPARATOR with exclusion possibility -- diameter ........-- width .
Page 30 SECTION 00 - - GENERAL INFORMATION 5BS - - 6AS ENGINE ......... . IVECO NEF SISU -- type .
Page 31 SECTION 00 - - GENERAL INFORMATION TYRED COMBINE DIMENSIONS (mm) Modd. 5BS - - 6AS - - 6BS 9600 The quote between brackets is referred to the trailer hitch with extension Modd. 5BS Modd. 6AS - - 6BS 327 258 010 - - 01 - - 2008...
Page 32 SECTION 00 - - GENERAL INFORMATION TRACKED COMBINE DIMENSIONS (mm) Modd. 5BS - - 6AS - - 6BS 2400 9600 The quote between brackets is referred to the trailer hitch with extension Modd. 5BS Modd. 6AS - - 6BS 327 258 010 - - 01 - - 2008...
Page 33 SECTION 00 - - GENERAL INFORMATION FREE DISTANCE BETWEEN UNLOADING PIPE AND HEADER (mm) S (mm) S (mm) S (mm) S (mm) MODD MODD. GRAIN HEADER GRAIN HEADER B (mm) 5 Straw Walker 6 Straw Walker 4710 2530 2657 225 LCS 5320 2225 2352...
Page 34 SECTION 00 - - GENERAL INFORMATION FREE DISTANCE BETWEEN UNLOADING PIPE AND HEADER (mm) with front tyres 4000 mm TYRES TYPE 650/75R32, 800/65R32 e 620/75R34 4000 4200 WITH FRONT TRACKS 4000 mm 4030 mm 4237 mm 327 258 010 - - 01 - - 2008...
Page 35 SECTION 00 GENERAL INFORMATION 327 258 010 -- 01-- 2008...
Page 36 SECTION 00 - - GENERAL INFORMATION TRACKS WITH SHOES TRACK CUTTING MACHINE CHAIN SHOES ROLLERS HEADER TYPE PITCH WIDTH envisaged 35x2 running ground 2325 2035 working direction line position 6.60 327 258 010 - - 01 - - 2008...
Page 37 SECTION 00 - - GENERAL INFORMATION GENERAL FEATURES - - MODD. 5BS AL 5BS AL FEEDING DEVICE CUTTING HEADER ..... . Grain header -- min.
Page 38 SECTION 00 - - GENERAL INFORMATION 5BS AL MULTI--CROP--SEPARATOR with exclusion possibility -- diameter ......-- width .
Page 39 SECTION 00 - - GENERAL INFORMATION -- no--load engine speed ..rpm/min 2250 -- fuel tank ......-- radiator guard .
Page 40 SECTION 00 - - GENERAL INFORMATION TYRED COMBINE DIMENSIONS (mm) Modd. 5BS AL 2220 3730 2350 9100 The quote between brackets is referred to the trailer hitch with extension Modd. 5BS AL 3545 (3510 only Suisse) 327 258 010 - - 01 - - 2008...
Page 41 This as a preview PDF file from best-manuals.com Download full PDF manual at best-manuals.com...

This manual is also suitable for:

Fendt 5250l al Fendt 6250l Fendt 6270l