Using The Ftm-100Dr/De Transceiver As A Node Station - Yaesu FTM-100DR/DE Instruction Manual

Using the FTM-100DR/DE transceiver as a node station

Follow the procedure below to use the FTM-100DR/DE transceiver as a node station.
1
Press and hold
OFF the transceiver.
2
While pressing
simultaneously, press and hold
for over one second to
turn ON the power.
Sets the FTM-100DR/DE
transceiver to node station
mode. Follow steps 1 to 2 again
to cancel node station mode.
Tips • Press and hold
one second to hide all displays
on the screen (the mode display and status indicator also turn off). Press
display the hidden displays.
• Pressing
voltage→frequency.
• Rotating the DIAL adjusts the contrast.
for over one second to turn
and
for over
each time switches the sub-band display: clock→power supply
32
again to