Technical Data - BorMann PRO BIW1300 User Manual

EN
The sign used in the manual means: take care! On guard! Involve your personal safety.
DANGER! Means sudden danger: It can get people injured or dead if it is inevitable.
WARNING! Means potential danger, it also get people injured or dead.
CAUTION! Means danger, it can get people injured
OVERVIEW
1
THE CONTROL PANEL
1. Led display
2. Wire speed control knob. As a general rule, a higher current
requires a higher wire speed
3. Ampere control knob
4. MIG/MMA switch. This switch between MIG function and MMA
function when welding requested
5. Thermal overload light. If the duty cycle is exceeded as a result of
welding too long with a high current, the yellow overload light will
illuminate and the welder will turn off. When the welder has cooled
down (approx. 5 to 10 minutes), the power will be restored and
welding can recommence.
6. Current overload light.
3
2
WWW.BORMANNTOOLS.COM
* The manufacturer reserves the right to make minor changes to product design and
technical specifications without prior notice unless these changes significantly affect
3
the performance and safety of the products. The parts described / illustrated in the
4
pages of the manual that you hold in your hands may also concern other models of
the manufacturer's product line with similar features and may not be included in the
product you just acquired.
5
* Please note that our equipment has not been designed for use in commercial,
trade or industrial applications. Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all
6
repair, inspection, repair or replacement work, including maintenance and special
adjustments, must only be carried out by technicians of the authorized service
department of the manufacturer.
7
8
9
10
No Description
1 LED Display
2 Carry Handle
3 Ampere control knob
4 MMA/MIG switch
5 Thermal overload light
1

Technical Data

Rated input voltage 230v/50hz
Rated input capacity 5.2KVA
MIG Current Range 50-160A
MMA Current Range 20-140A
Rated Duty 45%
Power factor 0.85
Degree of protection IP21S
Flux wire size 0.6/0.8mm
No Description
6 Current overload light
7 Wire speed control knob
8 Electrode Holder connection
9 Earth Clamp connection
10 Mig Torch connection
2
3
6
4
5