Technical Data; Main Parts - BorMann Pro BIW1700 Manual

EN
SAFETY PRECAUTIONS
During the welding process, there maybe certain security risks to the users. Learning to take necessary protective measures is very important. For further
details, please refer to the personal protective equipment guidelines that meet the manufacturer's accident prevention requirements.
Users must be properly trained so that they are able to operate the equipment correctly.
• Wear appropriate safety equipment when welding, which has the appropriate specifications.
• Avoid working long hours, take frequent breaks in order to reduce fatigue.
• Place the appliance horizontally on a ground whose slope does not exceed 150.
Risk of electric shock!
• Install the earthing in accordance with current standards and regulations; if you are not sure, consult a qualified electrician.
• It is dangerous to touch the electrical components and electrode with naked skin.
• Wear approved gloves and clothing.
• Make sure you are well insulated from the ground.
• Make sure you are in a safe and secure position.
Protect yourself from smoke and fumes produced during welding.
• Use the appropriate protective mask.
• Carry out the work in a well-ventilated area.
Arc radiation is harmful to your eyes and can burn your skin.
• Use suitable helmet and wear protective garments to protect eye and body.
• Use suitable protective equipment or curtain to protect any on-lookers and warn all onlookers about the possible risk to their eyes.
Incorrect use may lead to fire or explosion.
• Sparks generated during welding pose a fire hazard, make sure to remove all flammable materials from the work area.
• Make sure you have a fire extinguisher at a safe distance.
Do not perform welding in enclosed areas that do not have proper ventilation.
• Do not use the machine to thaw pipes.
• Do not touch the parts of the materials involved in the welding, these parts may have a high temperature and may cause burns.
• Allow the equipment to cool down after continuous operation by taking a break.
Noise generated during welding may cause damage to your hearing ability.
• Use ear protectors or others means to protect ears.
• Warn others in the vicinity that noise may be harmful to their hearing.
In case of malfunction, seek professional assistance.
• If troubles arise with installation and operation, please re check the set-up within this manual.
• If you fail to fully understand this manual you should contact the suppliers or another professional for assistance.
SPECIFICATIONS

Technical Data

Model
Rated Input Voltage
Rated Input Capacity
No-load Voltage
Current Range
Rated Duty
Applied Welding Rod
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the
products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be included
in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer shall
not be liable for injuries and damages resulting from the use of non-conforming equipment.
3
BIW1700 BIW2100
230 V 230 V
7.8 kW 7.8 kW
68 V 68 V
10 - 160 A 10 - 200 A
60% 60%
1.6 - 4 mm 1.6 - 5 mm
WWW.NIKOLAOUTOOLS.GR

Main Parts

1. Electrode holder clamp socket (+)
2. Display screen
3. Welding current adjusting knob
4. Ventilation ports
5. Grounding clamp (-)
6. Fan
7. ON/OFF switch
8. Power cable
9. Arc Force adjustment knob