Brake Caliper Service - Toro Greens Aerator Service Manual

Brake Caliper Service

1
2
Anti–seize
Lubricant
1. Adjustment pin
2. Jam nut
3. Groove pin
4. Cap screw (2 used)
Disassembly (Fig. 8)
1. Disassemble brake caliper using Figure 8 as a guide.
NOTE: Brake lining on anvil housing side may have
adhesive to secure it to housing.
2. Clean and inspect all caliper parts after disassembly.
Replace components that are worn or damaged.
Chassis
4
3
12
5. Live side housing
6. Backing plate
7. Floating bracket
8. Lock nut (2 used)
24 ft–lb
(32.5 N–m)
5
Anti–seize
Lubricant
6
11
10
Figure 8
Assembly (Fig. 8)
1. Assemble brake caliper using Figure 8 as a guide
noting the following items:
A. Apply anti–seize lubricant to actuator pin and ad -
justment pin before assembly.
B. Secure the caliper assembly by torquing the cap
screws 24 ft–lb (32.5 N–m).
C. Make sure that caliper assembly moves freely on
the floating bracket.
Page 6 – 12
7
9
9. Anvil housing
10. Brake lining
11. Actuator pin
12. Cam lever
Greens Aerator
8