VTech Eris Terminal VDP658 Quick Start Manual page 14

2. Connect the coiled handset and the power cord to the deskset.
Plug the large end of the
power adapter into a power
outlet not controlled by a
wall switch.
Raise the antenna for
optimum wireless range
and performance.
IMPORTANT INFORMATION
1. Use only the power adapter supplied with this product. To order a replacement
power adapter, visit our website at
businessphones.vtech.com
2. The power adapter is intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Plug the small end of the
power adapter into the
power jack at the bottom of
the deskset.
or call
Route the power adapter
cord through the slot at the
bottom of the deskset.
1 (888) 370-2006
14
Plug the end of the
coiled handset cord into
the jack at the bottom of
the deskset.
.