Programme Selection Mode - Zanussi ZDT26020FA User Manual

Table of Contents

Advertisement

Programme
P4
Quick A30
5)
Min
P5
Delicate
P6
6)
Rinse and Hold
P7
7)
Plate Warmer
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) With this programme you have the most efficent use of water and energy conumption for crockery and
cutlery with normal soil. (This is the standard programme for test institutes).
3) The appliance senses the degree of soil and the quantity of items in the baskets, it automotically adjusts
the temperature and the quantity of the water, the energy consumption and the programme duration.
4) This programme has a high temperature rising phase for better hygiene results. During the rinsing
phase, the temperature stays at 70 °C for at least 10 minutes.
5) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
6) Use this programme to quickly rinse the dishes. this prevents the remaining foor to bond on the dishes
and bad odours to come out from the appliance. Do not use detergent with this programme.
7) This programme makes the dishes warm before use or removes the dust from dishes not used for a long
time. Do not use detergent with this programme.
SETTINGS

PROGRAMME SELECTION MODE

The appliance is in Programme selection mode when, after the activation, the display shows number of the
programme Eco.
The display shows the programme duration after some seconds.
6
Degree of soil
Programme phases
Type of load
Fresh soil
Crockery and
cutlery
Normal or light
soil
Delicate crock-
ery and glass-
ware
All
All
Duration
(min)
Wash 60 °C
30
or 65 °C
Rinses
Wash 45 °C
70 - 80
Rinses
Dry
Prewash
14
Rinse 70 °C
30
Consumption values
1)
Energy
(kWh)
0.9
0.7 - 0.9
0.1
0.9
Water
(l)
9
13 - 14
4
4

Advertisement

Table of Contents
loading

Table of Contents