Cancel Function; User Mode; Adjusting The Water Softener - Zanussi ZDT26020FA User Manual

When the appliance is in Programme selection mode it is possible to set a programme.
If the control panel does not show this condition, do the Cancel.

CANCEL FUNCTION

Press and hold Cancel until the appliance is in programme selection mode.
With this function you can cancel the running programme or the delay start.

USER MODE

While the appliance is in programme selection mode:
1. Press and hold
• The indicators
In user mode can be changed:
• The level of the water softener according to the water hardness.
• The activation or the deactivation of the acoustic signal for end of programme.
• The activation or deactivation of the rinse aid empty notification.
These settings will be saved until you change them again.

ADJUSTING THE WATER SOFTENER

While the appliance is in user mode:
1. Press .
• The indicators
and .
, and starts to flash.
and are off.
7