1) 2)
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quan-
tity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
3) In accordance with the 1016/2010 regulation.
4) In accordance with the 2019/2022 regulation.
INFORMATION FOR TEST INSTITUTES
To receive the necessary information for conducting performance tests (e.g. according to EN60436 ),
send an email to:
info.test@dishwasher-production.com
In your request, please include the product number code (PNC) found on the rating plate.
For any other questions regarding your dishwasher, please refer to the service book provided with your
appliance.
SETTINGS
PROGRAMME SELECTION MODE AND
USER MODE
When the appliance is in programme selection
mode it is possible to set a programme and to enter
user mode.
Settings available in the user mode:
•
The level of water softener according to the
water hardness.
•
Activation or deactivation of the rinse aid empty
notification.
•
The level of rinse aid according to the required
dosage.
•
Activation or deactivation of the AirDry.
As the appliance stores the saved settings,
there is no need to configure it before every
cycle.
How to set the programme selection mode
The appliance is in programme selection mode
when the on/off indicator is on and
flashes.
Water hardness
German degrees
(°dH)
47 - 50
8
Water
(l)
2.9 - 3.6
indicator
French degrees
(°fH)
84 - 90
Energy
(kWh)
0.012 - 0.015
After activation, the appliance is in programme
selection mode by default. If not, set the
programme selection mode the following way:
Press and hold
programme selection mode.
THE WATER SOFTENER
The water softener removes minerals from the water
supply, which would have a negative effect on the
washing results and on the appliance.
The higher the content of these minerals, the harder
your water is. Water hardness is measured in
equivalent scales.
The water softener should be adjusted according to
the hardness of the water in your area. Your local
water authority can advise you on the hardness of
the water in your area. It is important to set the right
level of the water softener to assure good washing
results.
Clarke de-
mmol/l
grees
8.4 - 9.0
58 - 63
Duration
(min)
15
until the appliance is in
Water softener level
10