Table of Contents
Advertisement
ADDING DETERGENT
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
ADDING MULTI-TABLETS
•
Do not fill the salt container and the rinse aid dispenser.
•
Adjust the water softener to the lowest level.
•
Set the rinse aid dispenser to the lowest position.
PROGRAMME SELECTION MODE
The appliance must be in Programme selection mode to start a programme. If the control panel does not
show this condition, do the Reset.
RESET
With Reset you can cancel the running programme or the delay start. The appliance goes back to the
Programme selection mode.
1
2
1
2
A
B
9
Advertisement
Table of Contents
