Consumption Values; Programme Selection Mode And User Mode; The Water Softener - Zanussi ZDLN1512 User Manual

Hide thumbs Also See for ZDLN1512:
Table of Contents

Advertisement

CONSUMPTION VALUES

1) 2)
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quan-
tity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according to EN60436), send
an email to:
info.test@dishwasher-production.com
In your request, include the product number code (PNC) from the rating plate.
For any other questions regarding your dishwasher, refer to the service book provided with your appliance.
SETTINGS
PROGRAMME SELECTION MODE AND
USER MODE
When the appliance is in programme selection
mode it is possible to set a programme and to enter
user mode.
Settings available in the user mode:
The level of water softener according to the
water hardness.
Activation or deactivation of the rinse aid empty
notification.
Activation or deactivation of the acoustic signal
for the end of a programme.
Activation or deactivation of the AirDry.
As the appliance stores the saved settings,
there is no need to configure it before every
cycle.
How to set the programme selection mode
The appliance is in programme selection mode
when the programme indicator
After activation, the appliance is in programme
selection mode by default. If not, set the
programme selection mode the following way:
Press and hold the on/off button until the appliance
is in programme selection mode.
Water
(l)
9.9
11.1 - 13.6
9.6 - 11.7
9.2 - 11.2
3.4 - 4.2
How to enter user mode
Make sure the appliance is in programme selection
mode.
To enter the user mode, press and hold the
programme button until the indicator
flashes and the indicators

THE WATER SOFTENER

The water softener removes minerals from the water
supply, which would have a negative effect on the
washing results and on the appliance.
The higher the content of these minerals, the harder
your water is. Water hardness is measured in
equivalent scales.
The water softener should be adjusted according to
the hardness of the water in your area. Your local
water authority can advise you on the hardness of
the water in your area. It is important to set the right
level of the water softener to assure good washing
flashes.
results.
Energy
(kWh)
1.036
1.052 - 1.285
0.886 - 1.083
0.556 - 0.680
0.012 - 0.015
Duration
(min)
237
160
90
30
15
,
and
are on.
7

Advertisement

Table of Contents
loading

Table of Contents