Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZDT26020FA
Summary of Contents for Zanussi ZDT26020FA
- Page 1 User Manual GETTING STARTED? EASY. ZDT26020FA EN User Manual Dishwasher...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 3: Safety Instructions
Do not keep the appliance door open without supervision to • prevent to fall on it. Before any maintenance operation, deactivate the appliance • and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam to clean •... - Page 4 • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the dishes. • The appliance can release hot steam if you open the door while a programme operates.
-
Page 5: Easy Start
EASY START On/off button XtraDry button Display Delay button Programme button (up) Cancel button Programme button (down) Indicators Half load button INDICATORS End indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. PROGRAMMES Consumption values Degree of soil... -
Page 6: Programme Selection Mode
Consumption values Degree of soil Programme Programme phases Type of load Duration Energy Water (min) (kWh) Fresh soil • Wash 60 °C Quick A30 Crockery and or 65 °C cutlery • Rinses Normal or light • Wash 45 °C 70 - 80 0.7 - 0.9 13 - 14 Delicate... -
Page 7: Cancel Function
When the appliance is in Programme selection mode it is possible to set a programme. If the control panel does not show this condition, do the Cancel. CANCEL FUNCTION Press and hold Cancel until the appliance is in programme selection mode. With this function you can cancel the running programme or the delay start. -
Page 8: The Water Hardness Table
• The indicator continues to flash. • The display shows the current setting: e.g. = level 5. 2. Press to change the setting. Each time you press the button, the level increases. After level 10 you will start again from level 1. 3. -
Page 9: Activating The Acoustic Signal For The End Of Programme
– = rinse aid empty notification activated. – = rinse aid empty notification deactivated. 2. Press to change the setting. 3. Press on/off button to confirm the setting. When rinse aid chamber is empty, the rinse aid indicator is turned on notifying to refill rinse aid. -
Page 10: Daily Use
ADDING SALT Before first use put one litre of water in the salt container. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. ADDING RINSE AID The rinse aid helps to dry the dishes without streaks and stains. - Page 11 ADDING MULTI-TABLETS • Adjust the water softener to the lowest level. THE AUTO OFF FUNCTION This function decreases energy consumption by deactivating automatically the appliance when it is not operating. The function comes into operation: • 5 minutes after the completion of the programme. •...
- Page 12 OPTION XTRADRY Activate this option when you want to boost the drying performance. With the use of this option, the duration of some programmes, water consumption and the last rinse temperature can be affected. TheXtraDry option is not a permanent option and must be selected at every cycle. This option in not applicable to Rinse and Hold .
-
Page 13: Hints And Tips
If you open the door before the activation of Auto Off, the appliance is automatically deactivated. HINTS AND TIPS GENERAL recommend to use solo-detergent (powder, gel, tablets without additional functions), rinse aid The following hints will ensure optimal cleaning and and salt separately for optimal cleaning and drying results in daily use and also help to protect drying results. -
Page 14: Unloading The Baskets
BEFORE STARTING A PROGRAMME UNLOADING THE BASKETS Make sure that: 1. Let the tableware cool down before you remove it from the appliance. Hot items can be • The filters are clean and correctly installed. easily damaged. • The cap of the salt container is tight. 2. -
Page 15: Internal Cleaning
INTERNAL CLEANING • To maintain the performance of your appliance at its best, we recommend to use monthly a • Carefully clean the appliance, including the specific cleaning product for dishwashers. rubber gasket of the door, with a soft damp Follow carefully the instructions on the cloth. -
Page 16: The Washing And Drying Results Are Not Satisfactory
Problem and alarm code Possible cause and solution The program lasts too long. • If the delayed start option is set, cancel the delay setting or wait for the end of the countdown. The remaining time in the dis- • This is not a defect. - Page 17 Problem Possible cause and solution There are whitish streaks or blu- • The release quantity of rinse aid is too much. Adjust the rinse ish layers on glasses and dishes. aid level to a lower level. • The quantity of detergent is too much. There are stains and dry water •...
-
Page 18: Technical Information
TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 555 Voltage (V) 200 - 240 Electrical connection Frequency (Hz) 50 / 60 Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply max 60 °C Cold water or hot water... - Page 20 WWW.ZANUSSI.COM/SHOP...