Advertisement
EN
QUARTZ HEATER
BETSY
This product is only suitable for correctly-insulated
environments or for occasional use.
OPERATING INSTRUCTIONS
Read the instructions carefully before operating the appliance or carrying out maintenance
operations.
Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or
damage. Keep these instructions in a safe place for future reference.
V 04/21
10
Advertisement
Table of Contents
Related Manuals for Argo BETSY
Summary of Contents for Argo BETSY
- Page 1 QUARTZ HEATER BETSY This product is only suitable for correctly-insulated environments or for occasional use. OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage.
-
Page 2: General Safety Information
GENERAL SAFETY INFORMATION Use this quartz heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. Ensure that the mains power complies with the voltage specified on the quartz heater data plate (230V~/50-60Hz). - Page 3 is covered or incorrectly positioned. Do not restrict the air inlet and outlet grilles. The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces. Ensure that all objects are at least 1 meter from the front and sides of the appliance.
- Page 4 soapy water. Always remove the plug from the mains socket before cleaning. To disconnect the quartz heater, use both buttons by placing them in the position 0 and remove the plug from the socket. Pull on the plug only. Avoid pulling on the cord when disconnecting the quartz heater.
- Page 5 The heating appliance must not be positioned immediately below a power outlet. Do not operate the appliance outdoors. Upon initial start-up, the quartz heater may emit a slight, harmless smell. This smell is a normal effect of the initial heat up of the internal heating elements, and should not recur later on.
-
Page 6: Description Of Parts
DESCRIPTION OF PARTS 1. Handle 2. Button 1 3. Button 2 4. Feet Use the top handle to move the quartz heater. INSTALLATION BEFORE USE Place the quartz heater upright on a flat and stable surface. Install the feet as shown in the figure below. Place the feet near the quartz heater and fix them with the screws (1 and 2) in the appropriate space. -
Page 7: Maintenance And Storage
HOW TO USE THE QUARTZ HEATER Connect the power cord to a suitable electric socket (230V~/50-60Hz). Press the power button I (600W) or I + I (1200W) upwards. To turn off the quartz heater, press the button (or both buttons) again downwards, which will be in position 0. Disconnect the power cord when the quartz is not in use. - Page 8 Table 2 - Annex II - Ecodesign requirements - Requirements for product information - COMMISSION REGULATION (EU) 2015/1188 of 28 April 2015 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for local space heaters Model identifier(s): BETSY Item Symbol...
- Page 9 INFORMATION ON THE CORRECT DISPOSAL OF THE PRODUCT pursuant to Art. 26 of (Italian) Legislative Decree no. 49 of 14/03/14, “IMPLEMENTATION OF DIRECTIVE 2012/19/EU ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT” At the end of its useful life, this appliance must not be disposed of together with household waste. We call your attention to the crucial role played by the consumer in the reuse, recycling and other forms of recovery of such waste.
Need help?
Do you have a question about the BETSY and is the answer not in the manual?
Questions and answers