Argo beatIP21 Operating Instructions

Bathroom ceramic fan heater

BATHROOM CERAMIC FAN HEATER - IP21

OPERATING INSTRUCTIONS

Read the instructions carefully before installing and operating the appliance or performing

maintenance operations. Observe all the safety instructions; failure to observe the instructions may

cause accidents and/or damages. Store these instructions for future reference.

V 05/13

Table of Contents

Need help?

Do you have a question about the beatIP21 and is the answer not in the manual?

Page 1 BATHROOM CERAMIC FAN HEATER - IP21 OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/or damages. Store these instructions for future reference. V 05/13...
Page 2 GENERAL SAFETY INFORMATION  Use this fan heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people.  Ensure that the mains power complies with the voltage specified on the fan heater ’s data plate (220-240V~/50Hz). ...
Page 3  Do not position the fan heater below a socket outlet.  Do not operate the appliance outdoors. WARNING: do not use the fan heater with a controller or any other external device that activates the appliance automatically, as there may be a risk of fire if the fan heater is covered or incorrectly positioned. Upon initial start-up, the fan heater may emit a slight, harmless smell.
Page 4 CONTROL PANEL AND AVAILABLE FUNCTIONS On/off LED COMFORT mode: maximum heating power (2000W) Thermostat adjustment knob: from minimum to maximum temperature, by turning the knob anticlockwise (MIN.- ECO mode: 1300 W MAX) reduced power to save energy OFF: fan heater off in position “O”...