Operating board
Removal and Replacement
1. Disconnect power supply.
2. Remove all screws for fixing control panel. (see control panel removal and installation)
3. Put out all housings for connecting operating board.
4. Remove screw and unfix all snaps for fixing the operating board. (see control panel
removal and installation)
5. Reverse the above procedure to install. And check out all connectors connected well.
Outer Door
The outer door covers the door to the dishwasher and protects the detergent dispenser.
Removal and Installation
1. Open the door of dishwasher. And remove all screws for fixing outer door.
2. Reverse the above procedure to install. And check out all connectors connected well.
Front View (with outer door assembly removed)
Part Name: 1 stream resistant cotton 2
cotton 4 door hinge (left) 5 door hinge(right)
hinges
Screws
7 kick board
dispenser 3 sound absorbing
13
1
2
3
4
5
6
7
6
rod for door