Tail Lamp & License Plate Illuminator; Trafficator Bulb Replacement - Royal Enfield HIMALAYAN BS VI 2021 Owner's Manual

MINOR MAINTENANCE TIPS
TAIL LAMP & LICENSE PLATE ILLUMINATOR
The tail lamp & license plate
illuminator has a LED lighting
system. In the event of failure,
the entire tail lamp & license
plate illuminator assembly
should be replaced.
Contact an Authorised Royal
Enfield Dealer / Service Centre
to replace the same.
102 Royal Enfield Himalayan

TRAFFICATOR BULB REPLACEMENT

Remove the screw from the
n
trafficator housing back side.
n Remove outer lens.
n Remove the fused bulb by
pushing and turning
anticlockwise direction.
n Position the new bulb inside the holder, ensuring that the
pins in the bulb, match with slots in the holder.
n Push the bulb and turn clockwise direction to lock the
bulb in the holder.
n Refit the trafficator cover with reflector and tighten the
screw.
NOTE
Do not over tighten the screw. Make sure the Ignition switch is
in "OFF" position when replacing the Bulbs, Fuses and
Electrical parts.
in