SOMFY Telis 1 Soliris RTS Pure Instructions

SOMFY INSTRUCTIONS
TELIS 1 SOLIRIS RTS
REMOTE CONTROLS
Part #'s
1810635 Telis 1 Soliris RTS Pure
1810647 Telis 1 Soliris RTS Patio
PROGRAMMING - ADDING A NEW REMOTE
1. Using a paper clip, pen or similar device,
press and hold the Programming Button on
the back of your current remote until your
window shade jogs up and down.
3. Using a paper clip, pen or similar device,
press and hold the Programming Button
on the back of your new remote. The
window shade will jog. This remote will
now operate your shade or awning.
PROGRAMMING - SETTING FAVORITE 'MY' POSITION
1. Using the up ( ) or down (
buttons, bring the shade or awning
to your favorite position, for example
halfway down or out. Press the
center ( ) button to stop movement
my
at the desired location.
3. To reach your favorite position,
press the center ( ) button
my
whenever the shade is already
stopped. The shade or awning
will automatically go to that
position.
© Copyright Somfy Systems, Inc. 1/2010
Sun/Wind
Selector
Pen
Programming
Button
BACK
Pen
Programming
Button
BACK
)
my
Sun
Wind
& Wind
Only
Programming
Button
Telis 1
2. Pick up your new remote.
2. Press and hold the center (
button until the window shade
jogs up and then down to record
the position.
C - 0003
Pen
BACK
my
)
my
PAGE 1 REV 3