SOMFY Telis 1 RTS Pure Instructions For Use

SOMFY INSTRUCTIONS
TELIS RTS REMOTE CONTROLS
SINGLE & FIVE CHANNEL
Part #'s
1810632 Telis 1 RTS Pure
1810633 Telis 5 RTS Pure
1810639 Telis 1 RTS Silver
1810641 Telis 5 RTS Silver
1810650 Telis 1 RTS Lounge
1810652 Telis 5 RTS Lounge
1810643 Telis 1 RTS Patio
1810645 Telis 5 RTS Patio
PROGRAMMING – ADDING A NEW REMOTE OR OPERATING CHANNEL
A previously programmed remote can be used in order to add a new remote or channel to the Motorized Window Covering.
If a Telis Transmitter has not been previously programmed, please refer to the installation instructions of the relevant RTS
motorized window covering.

Adding a Telis 1 RTS Transmitter only:

1. Using the previously programmed Telis
remote, press and hold the programming
button on back of remote until
window covering "jogs."
Adding a Telis 5 RTS Transmitter only:
1. Using the previously programmed Telis
remote, press and hold the programming
button on back of remote until window
covering "jogs."
UP
STOP
my
DOWN
LED
Indicator
Light
Single Channel
Version
Previously
programmed remote
Pen
2. Using the new Telis 1 remote,
Programming
Button
BACK VIEW
Previously
programmed remote
Pen
2. Using the new Telis 5 remote, select
Programming
Button
BACK VIEW
3. Using the Telis 5 remote, briefly press the
C-0001
UP
STOP
my
DOWN
LED Lights
Channel
Selector
Five Channel
Version
briefly press the programming
button until the window covering
"jogs." Window covering has
now learned the commands of
the new Telis remote.
the desired channel using the CHANNEL
SELECTOR BUTTON. (The LED will illuminate
each time the Channel Selector Button is
pressed, indicating the selected channel)
programming button until the motorized
window covering "jogs". The RTS motorized
window covering has now learned the
commands of the new Telis 5 remote.
Pen
Programming
Button
BACK BACK
New Telis 1
remote to be added
Pen
Programming
Button
BACK VIEW
my
LED Lights
Channel
Selector
New Telis 5
remote to
be added
Pen
Programming
Button
BACK VIEW
PAGE 1 REV 6