5.
If the packets are discarded after being sent to the CPU, contact H3C Support.
6.
Execute the bcm slot chip l3/defip/show command in probe view to determine whether the
routing entries are correct and whether the packets match the routing entries. If not, contact
H3C Support
7.
If the problem persists, contact H3C Support.
Packet loss in data forwarding
Symptom
Packet loss occurs in data forwarding.
Solution
To resolve the problem, see
Related commands
This section lists the commands that you might use for troubleshooting SAP modules.
Command
bcm slot chip l3/defip/show
bcm slot chip l3/l3table/show
bcm slot chip show/counter
debugging physical packet [all | input | output ]
interface interface-number
display counters { inbound | outbound } interface
display interface interface-number
reset counters interface
"Failure to forward
traffic."
16
Description
Displays information about routing entries.
Displays ARP entries.
Displays traffic statistics and data rate for an
interface.
Displays information about the packets sent to the
CPU.
Displays traffic statistics on an interface.
Displays information about an interface.
Clears traffic statistics on an interface.