Table of Contents
Advertisement
(5) Notwithstanding the provisions herein, warranty services or repair will be provided at all of our distribution centers that are franchised to service the subject engines.
(6) The engine owner must not be charged for diagnostic labor that leads to the determination that a warranted part is in fact defective, provided that such diagnostic work
is performed at a warranty station.
(7) Buffalo Corp. is liable for damages to other engine components proximately caused by a failure under warranty of any warranted part.
(8) Throughout the engine warranty period stated above, Buffalo Corp. will maintain a supply of warranted part sufficient to meet the expected demand for such parts.
(9) Any replacement may be used in the performance of any warranty maintenance or repairs and must be provided without charge to the owner. Such use will not reduce
the warranty obligations of Buffalo Corp.
(10) Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any non-exempted add-on or modified parts by the ultimate
purchaser will be grounds for disallowing a warranty claims. Buffalo Corp. will not be liable to warrant failures of warranted parts caused by the use of a non-exempted
add-on or modified part.
(11) The manufacturer issuing the warranty shall provide any documents that describe that manufacturer's warranty procedures or policies within five working days of
request by the Air Resources Board.
EMISSION WARRANTY PARTS LIST
(1) Fuel Metering System:
(a) Gasoline carburetor assembly and its internal components
(b) Carburetor gaskets
(d) Clamps
(f) Fuel line fittings
(h) Mixer assembly and its internal components (if equipped)
(2) Air induction system including:
(a) Intake pipe/manifold
(3) Ignition system including:
(a) Spark plug
(b) Ignition coil
(4) Catalytic muffler assembly including:
(a) Muffler gasket
(b) Exhaust manifold
(c) Catalytic converter
(5) Crankcase breather assembly including:
(a) Breather connection tube
(6) Fuel tank evaporative emissions control system including:
(a) Purge valves
(c) Fuel tank
(d) fuel lines (for liquid fuel and fuel vapors)
(7) Miscellaneous items used in above systems including:
(a) Switches
(b) Hoses, belts connectors and assemblies
(8) Air injection system
(a) Pulse valve
Please Note:
For this warranty, Buffalo Corp. shall warrant the Evaporative and Exhaust combined emission control system on your products.
201907
Item # GEN85KIDF Portable Dual Fuel Invertor Generator
(c) fuel lines (for liquid fuel and fuel vapors)
(e) Fuel tank
(g) Pressure regulator(if equipped)
(b) Air cleaner
(b) Fuel cap
32
Advertisement
Table of Contents
