Drive Mode - Silvercrest DS-1020T User Manual And Service Information

SilverCrest DS-1020T

Drive Mode

The functions in the Drive Mode menu allow you to programme the self-timer
or to enable the burst capture. The corresponding icon from the table will be
displayed on the LCD (see page 19 – item 4). The following settings are
available:
Option
Off
10 sec.
2 sec.
Burst
Auto
Exposure
Speed Burst
Icon Description
Normal single shot without any further modes.
Captures the photo with a 10-second delay
after pressing the shutter button [4].
Captures the photo with a 2-second delay
after pressing the shutter button [4].
After enabling this function you can capture a
picture sequence. The camera will shoot in
sequence while you keep the shutter button
[4] pressed. The shutter sound will be
generated only for the first capture.
This function will capture an exposure
sequence. Three pictures with different
exposure settings will be captured in series:
normal exposure, underexposed and
overexposed. This is a useful function when
shooting under lighting conditions that are
difficult to evaluate a priori, allowing you to
obtain the correct setting without
experimenting.
After pressing the shutter button [4] a series of
12 pictures will be captured per second. The
resolution will automatically be downsampled
to VGA 640x480. After this the message
"Busy...please wait" appears until the pictures
have been saved.
English
41