Inserting The Sd Card - Silvercrest DS-1020T User Manual And Service Information

SilverCrest DS-1020T
To remove the rechargeable battery push the unlock button located inside
the camera outwards. The rechargeable battery will protrude a little so that
you can get a hold of it and remove it.
If the rechargeable battery is empty, the message Replace
battery will appear on the display [10] and a beep can be heard.
Make sure that the camera is switched off before you remove
the rechargeable battery.
Remove the rechargeable battery from the camera when the
device is not to be used for a long time.

Inserting the SD Card

By using the supplied SD memory card you can increase the camera storage
capacity for saving your photos, videos and voice recordings.
When the memory card is inserted, all the photos and videos you take will be
saved onto it. If there is no memory card inserted, your photos and videos
will be saved to the internal memory of the camera.
Power off the camera using the On/Off switch [1] before you
insert or remove a memory card.
1
2
Open the camera battery compartment by
pushing the lock in the direction of the
arrow mark.
The cover will spring open through a
spring mechanism.
English
15