Cables; Maintenance And Care - Silvercrest DS-1020T User Manual And Service Information

English SilverCrest DS-1020T

Cables

Always hold cables by the plug and never pull on the cable itself. Never hold
the power cord with wet hands as this may cause a short circuit or electric
shock. Never place the device, heavy objects or furniture on the cable and
take care that the cord does not become trapped, especially at the plug and
sockets. Never make knots in the cable and do not tie it together with other
cords. All cables should be positioned so that nobody can trip over them or
be obstructed by them. A damaged power cord can cause a fire or an electric
shock. Inspect the power cord from time to time. Do not use any adapter plug
or extension cable that does not meet the required safety standards.

Maintenance and Care

Servicing is required when this device has been damaged in any way, for
example, when the charger or the camera housing is damaged, when liquid
or objects have entered the device, when the product has been exposed to
rain or moisture, when the product does not work normally or if the product
has been dropped. If you notice any smoke, unusual noise or strange smells,
switch off the device immediately and unplug the power cord from the power
supply. In this case the device should not be used further and should be
inspected by authorized service personnel. Please contact qualified
personnel when servicing is needed.
8