Using The Zoom Function - Silvercrest DS-1020T User Manual And Service Information

SilverCrest DS-1020T

Using the Zoom Function

Your camera features a combination of optical and digital zoom allowing you
to zoom in on distant subjects or to zoom out for wide-angle shots.
The optical zoom adjusts the camera lens mechanically. The digital zoom
enlarges or reduces the picture via software control.
In Recording mode, select the desired subject area by pressing the zoom
buttons.
Press the Zoom Tele button [5] to reduce the zoom factor and obtain
a telephoto shot.
Press the Zoom Wide button [6] to enlarge the zoom factor and
obtain a wide-angle shot.
When pressing any of the zoom buttons the zoom bar (see page 19 – item 5)
will appear on the display [10].
When the maximum optical zoom factor has been reached, zooming will
pause. Press the Zoom Tele button [5] again. The camera switches to digital
zoom mode and will continue zooming in.
Optical zoom area
Before you can use the digital zoom, you must enable it (see
page 69, Digital Zoom).
Digital zoom area
Zoom mark
Figure: Zoom bar [5] on display [10]
English
25