Getting Started; Charging The Battery - Silvercrest DS-1020T User Manual And Service Information

SilverCrest DS-1020T

Getting started

The camera functions with a rechargeable Lithium-Ion battery. On delivery,
the battery is not charged. Please charge the battery before first use of the
camera.

Charging the Battery

Insert the rechargeable battery in the charger Scope DJ04V20500A so that
the contacts [+] and [-] correspond to the rechargeable battery and charging
tray markings. Next connect the smaller plug of the power cord to the
charger and plug the power cord to a wall outlet.
Indicator
The status indicator of the charging cradle will light orange whilst the battery
is charging. When the charging process is completed, the status indicator will
light green. You can then insert the rechargeable battery into the camera.
Depending on the charge level, the charging cycle can take up to 4 hours.
If, after inserting the rechargeable battery, the indicator remains green, this
means the rechargeable battery is already charged or it is not correctly
inserted. In this case, check the polarity.
To operate the camera, only use the rechargeable Lithium-Ion
battery Emore NP40.
Remove the rechargeable battery from the camera when the
device is not to be used for a long time.
During charging, the rechargeable battery and charging device
will become warm. This is not a malfunction.
English
13