Cleaning The Paper Discharger - Brother HL-2400C Service Manual

1.2.5

Cleaning the Paper Discharger

The paper discharger should be cleaned according to the periodic maintenance
cleaning cycle set out in Table 6-3.
<Tools to Prepare>
1) Cotton cloth (2 ∼ 3 pieces)
2) Cotton swab (2 ∼ 3 pieces)
<Cleaning Procedure>
1) Turn off the power supply, and unplug the power cable.
2) Open the transfer unit.
3) Remove the paper discharger unit.
(Fig.6-5)
4) Clean the discharger case housing
with a cotton cloth.
5) Clean the corona wire and the
inside of the charger case with a
cotton swab. (Fig.6-6)
6) Re-install the charger unit into the
transfer unit.
• Do not break the vinyl string on top of the case when cleaning the discharger unit.
• Do not break the corona wire.
Transfer Unit
Vinyl String
CAUTION
VI-10
Paper Discharger
Fig.6-5
Cotton swab
Corona Wire
Fig.6-6