Brother HL-2400C Service Manual page 202

Sequence of Replacement
1) Pull the right hand side of the paper
discharger slightly, then lift it out of
the transfer unit to remove the paper
discharger. (Fig.6-22)
2) Clean the area where the paper
discharger unit is mounted. (Fig.6-
23)
3) Install the new paper discharger unit
into the transfer unit.
Sequence of Assembling
1) Close the rear access cover.
2) Plug the power cable into the printer, and turn on the printer.
3) Upon completion of the warming-up process;
Press the Reset button while holding down the Shift button, and select
"RESET PARTS LIFE" and then "120K KIT".
Lever
Paper Discharger
VI-25
Fig.6-22
Fig.6-23