Table of Contents
Advertisement
Hardware Installation
The ISDN Router incorporates a DHCP Server. If you already
have a DHCP Server, and wish to continue using it, set DIP
switch 2 ON to disable the DHCP Server in the ISDN Router.
1.
Use the supplied cable to connect the WAN port to the S/T connector on your
ISDN NT1 (Network Terminator 1.
2.
Connect the LAN port to your 10BaseT or 100BaseT hub.
3.
Connect the supplied power supply.
Software Installation
1.
Insert the supplied CD-ROM into your drive.
2.
If the install program does not start, run SETUP.EXE in the root directory.
3.
Follow the prompts to complete the installation.
4.
The setup program will now run.
Figure 2: Installation
Setup & Operation
5
Advertisement
Table of Contents
