LevelOne WBR-6003 User Manual page 33

150mbps wireless router
Hide thumbs Also See for WBR-6003:
Table of Contents

Advertisement

WDS (Wireless Distribution System)
WDS operation as defined by the IEEE802.11 standard has been made available. Using WDS
it is possible to wirelessly connect Access Points, and in doing so extend a wired infrastructure
to locations where cabling is not possible or inefficient to implement.
For maximum compatibility, it is recommended that WDS be set up using only the same
models, in this case, WBR-6003/ WBR-6006. Also note that the standard only supports WEP
encryption.
Select the AP Mode that most suites your desired application.
AP Only:
WDS is disabled. WBR-6003/ WBR-6006 functions as normal Access Point mode
WDS - Bridge:
Create a WDS Bridge between multiple Access Points, and bridge to only wired
connections. In this mode, the WBR-6003/ WBR-6006 will not provide service to any
wireless clients.
WDS - Bridge + AP:
A combination of the AP and Bridge modes can create a WDS Bridge between multiple
Access Points, and also accept wireless and wired clients.
Then type in the MAC addresses of other Access Points in the Remote AP MAC fields. Or you
can copy the ones from Scanned AP's MAC list.
Click Save to save the settings and Undo to cancel.
31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wbr-6006

Table of Contents