Canon TX-4100 Online Manual page 638

Deleting Print Job
Use Stop button from printer to cancel the print job.
Restrictions on the AirPrint
• If A2+, A3+, or 13 x 22 is selected for Paper Size in the print dialog, part of the image may not fit on
the paper.
• If printing cut paper, the bottom edge of the image may be cut out.
• The roll sheets with the below width cannot be printed without borders.
◦ 39.37 in. (1000.0 mm)
◦ 34.00 in. (863.6 mm)
◦ 31.50 in. (800.0 mm)
◦ 30.00 in. (762.0 mm)
◦ 23.62 in. (600.0 mm)
◦ 22.00 in. (558.8 mm)
◦ 20.00 in. (508.0 mm)
◦ 19.69 in. (500.0 mm)
◦ 18.00 in. (457.2 mm)
◦ 16.54 in. (420.0 mm)
◦ 16.00 in. (406.4 mm)
◦ 15.00 in. (381.0 mm)
◦ 12.95 in. (329.0 mm)
◦ 12.00 in. (304.8 mm)
◦ 11.81 in. (300.0 mm)
◦ 11.69 in. (297.0 mm)
◦ 10.12 in. (257.0 mm)
◦ 8.00 in. (203.2 mm)
◦ 6.00 in. (152.4 mm)
• If printing cut paper, feed the paper vertically. If the paper is fed horizontally, it will still print vertical
images.
• When printing images with large data sizes, the color may turn out uneven. In this case, select Printer
settings -> Hard disk settings -> Save first and print -> ON on the operational panel of the printer.
• Some paper sizes that are compatible with the Canon IJ printer driver are not compatible with AirPrint.
If using these sizes, set a custom size.
• Canon imagePROGRAF Free Layout and Canon imagePROGRAF Preview cannot be used.
638