Canon TX-4100 Online Manual page 737

Remove a Jammed Sheet
Roll paper cannot be inserted into the Paper Feed Slot
Paper is not fed automatically
Roll Paper Is not Switched Automatically
Roll Paper Is not Fed Automatically
Paper Source Does Not Switch When Roll Paper Is Used Up
Roll Paper Remains/Lacks under Quantity Management
Cannot load sheets
Paper is not cut straight
Paper is not cut
Cutter Blade Does Not Work While Cutting Is in Progress
The size of clear film cannot be detected
Margins are wide
When printing on roll paper, the printed surface becomes scratched
Printing Does Not Start
Printer Suddenly Stopped Working for Some Reason
The Data lamp on the Operation Panel does not light up
The printer does not respond even if print jobs are sent
"Preparing the ink system." is displayed
"Agitating the ink" is displayed
Message Is Displayed and Borderless Printing Fails
The Printer Stops During a Print Job
Printing stops and an error message is displayed
The printer ejects blank, unprinted paper
Cannot Print over Network
Cannot Connect Printer to Network
Cannot Print over TCP/IP Network
Cannot Print over Bonjour networks
Cannot Find Printer on Network
Cannot Find Printer on Check Printer Settings Screen (Windows)
Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen
Searching Printer by IP Address or Host Name During Setup
Cannot Find Printer while Using Wi-Fi
Cannot Find Printer while Using Wired LAN
Cannot Print Using AirPrint
Installation Problems
Removing Printer Software
Taking Time to Setup Process (Windows)
Failed to Printer Driver Installation (Windows)
HP-GL/2 problems
With HP-GL/2, printing is misaligned
Lines or images are missing in printed HP-GL/2 jobs
Lines are printed too thick or thin in HP-GL/2 print jobs
737