Table of Contents
Advertisement
◦ Inward Winding
◦
Important
• If the roll holder lifts up, it may cause an error.
•
7.
7. To stabilize operations when starting taking up, advance roll paper with operation panel and
wind roll paper approximately one revolution. (See
8.
8. Push roll holder downward again, and check that roll holder is not lifting up.
The winding preparation is complete. When printing to the roll starts, the roll paper can be
automatically wound.
• If Ready to print appears on touch screen
•
1. Manually advance roll paper (See
1.
for leading edge of roll paper to reach roll unit.
2. Hold center of leading edge of roll paper, align right edge of take-up spool paper core's right
2.
edge and tape center to paper core while pulling on roll paper evenly.
◦
◦ Outward Winding
"Feeding Roll Paper
"Feeding Roll Paper
Manually.") or start printing, and wait
193
Manually.")
Advertisement
Table of Contents
Troubleshooting
