Mounting Extension Modules - Wieland ricos FLEX BC MODBUS User Manual

 Turn the locking lever upwards, place the bus coupler at the mounting rail and turn the lever
downward.
5.2.2

Mounting extension modules

 Before mounting the extension modules you have to remove the bus cover at the right side of
the bus coupler by pulling it forward. Keep the cover for later mounting.
 Mount the extension modules you want.
 After mounting the whole system, to protect the backplane bus connectors at the last module
you have to mount the bus cover, now. If the last module is a clamp module, for adaptation the
upper part of the bus cover is to be removed.
Wieland Electric GmbH | BA001269 | 09/2021 (Rev. A)
Mounting, wiring and demounting
24