Wieland ricos FLEX BC MODBUS User Manual page 44

Register Overview
Here you get a general overview of the Modbus addressing of the modules, which are currently on
the backplane bus. The addresses of the registers for bit or word access are shown for each module.
It is shown in hexadecimal form – decimal in brackets. Normally the access with Modbus happens by
means of the ranges 0x, 1x, 3x and 4x. The following assignment is valid:
•
•
•
•
More information: 6.9 Modbus function codes, p. 51
6.4.1.4 Web page with selected module
Info
Here product name, order number, serial number, firmware version and hardware state number of
the according module are listed.
Data
At Data the states of the inputs respectively outputs are listed. In addition, you can directly control
the outputs of the corresponding module.
Parameters
If available the parameter data of the corresponding module may be shown and changed if neces-
sary.
Wieland Electric GmbH | BA001269 | 09/2021 (Rev. A)
0x – Bit area for master output
Access via function code 01h, 05h, 0Fh
1x – Bit area for master input
Access via function code 02h
3x – Word area for master input
Access via function code 04h, 17h
4x – Word area for master output
Access via function code 03h, 06h, 10h, 16h, 17h
Deployment
44