Epson Perfection 610 User Manual page 48

Problem
Your system doesn't
meet the minimum
requirements.
EPSON TWAIN needs
more memory.
EPSON TWAIN is not
selected as your
TWAIN source.
A system error has
occurred.
The scanner does not start scanning.
Problem
The scanner isn't
ready.
Troubleshooting
Solution
Make sure your computer, scanner, and software are compatible and
meet the specifications under
Make sure EPSON TWAIN can access enough system memory. See
the section on memory allocation in your computer manual.
EPSON TWAIN may not be selected as the TWAIN source in your
application. See Starting EPSON TWAIN
An error condition may have caused your application or the TWAIN
source to stop working correctly. Save any documents in process, close
any open applications, and exit Windows. Restart Windows, then start
your application and try again.
Sometimes an error condition may cause the computer to display a
message telling you that your scanner is not recognized. If this happens,
restart your computer and try again.
Solution
Check if the scanner is plugged in. If not, plug in the scanner. Then
restart your computer and try scanning again.
System Requirements.
for instructions on selecting it.
Page 48